Nespresso Momento 120 Service Manual page 206

206
Final tests > Protective Earth (PE) Continuity Test
3. At the coffee module: Insert the test probe into the test hole which is located in
the capsule ejection opening.
4
4. Touch the bottom plate with the test probe.
What to do if this test fails?
• Remove the coffee and milk module. Check the ground wiring and ground termi-
nals in the main housing and coffee module.
• Perform further, detailed measurements with the electric safety tester. Localise
and rectify any faults occurring.
• Check/replace the power cord.
Momento 120 Service Manual
3
Fig. 173
Fig. 174
Version 1.4 EN