3
Using the Pump
Setting up the Pump with the Instrument Control Interface
Setting up the Pump with the Instrument Control
Interface
Overview
The instrument control interface offers the parameters described in the following
sections, and can usually be accessed through Agilent instrument control
software. For details, please see manuals and online help of respective user
interfaces.
Instrument Configuration
Use the Instrument Configuration dialog box to examine and, if necessary, modify
your instrument configuration. The Configurable Modules panel contains a list of
all modules available for configuration. The Selected Modules panel contains the
list of configured modules.
Auto Configuration: Under Communication settings, select either the Host Name
option or the IP address option and enter the appropriate value for the host
computer to enable automatic detection of the hardware configuration. The
system configures the instrument automatically with no further manual
configuration necessary.
Agilent InfinityLab LC Series 1260 Infinity II Isocratic and Quaternary Pumps User Manual
57