Agilent Technologies InfinityLab LC Series User Manual page 58

3 Using the Pump
Setting up the Pump with the Instrument Control Interface
The Quaternary Pump configuration parameters are in two sections:
•
•
Communication: The parameters in this dialog box are detected automatically
during autoconfiguration.
•
•
•
•
•
Options:
•
•
Please refer to the online help of your user interface for more detailed
information.
Agilent InfinityLab LC Series 1260 Infinity II Isocratic and Quaternary Pumps User Manual
Communication
Options
Device name,
Type ID,
Serial number,
Firmware revision,
Button Connection settings
Pressure Unit:
select the pressure units from the drop-down list (bar, psi or MPa).
Seal wash installed:
This check box is marked to indicate that an optional seal wash has been
detected during autoconfiguration.
58