Setting Up The Pump With The Instrument Control Interface; Overview; Instrument Configuration - Agilent Technologies InfinityLab LC Series User Manual

3 Using the Pump

Setting up the Pump with the Instrument Control Interface

Setting up the Pump with the Instrument Control
Interface

Overview

Parameters described in following sections are offered by the instrument control
interface and can usually be accessed through Agilent instrument control
software. For details, please refer to manuals and online help of respective user
interfaces.

Instrument Configuration

Use the Instrument Configuration dialog box to examine and, if necessary, modify
your instrument configuration. The Configurable Modules panel contains a list of
all modules available for configuration. The Selected Modules panel contains the
list of configured modules.
Auto Configuration: Under Communication settings, select either the Host Name
option or the IP address option and enter the appropriate value for the host
computer to enable automatic detection of the hardware configuration. The
system configures the instrument automatically with no further manual
configuration necessary.
The High-Speed Pump configuration parameters are in two sections:
•
•
Communication: The parameters in this dialog box are detected automatically
during autoconfiguration.
•
•
•
•
•
1290 Infinity II High-Speed Pumps User Manual
Communication
Options
Device name,
Type ID,
Serial number,
Firmware revision,
Button Connection settings
65