Agilent Technologies InfinityLab LC Series User Manual page 40

2 Site Requirements and Specifications
Performance Specifications
Table 5
Type
Instrument Control
Communication
Safety and maintenance
GLP features
Housing
For use with flow rates below 500 µL/min a vacuum degasser is required.
NOTE
Agilent InfinityLab LC Series 1260 Infinity II Isocratic and Quaternary Pumps User Manual
Performance Specifications G7110B
Specification
LC & CE Drivers A.02.14 or above
Instrument Control Framework
(ICF) A.02.04 or above
InfinityLab LC Companion
(G7108AA) with firmware D.07.25
or above
Instant Pilot (G4208A) with
firmware B.02.20 or above
Lab Advisor B.02.08 or above
Controller Area Network (CAN)
Enhanced Remote Interface (ERI)
Local Area Network (LAN)
Universal Serial Bus (USB)
Extensive diagnostics, error
detection and display through
Agilent Lab Advisor, leak
detection, safe leak handling, leak
output signal for shutdown of the
pumping system.
Low voltage in major maintenance
areas.
Early maintenance feedback
(EMF) for continuous tracking of
instrument usage in terms of seal
wear and volume of pumped
mobile phase with pre-defined and
user settable limits and feedback
messages. Electronic records of
maintenance and errors
All materials are recyclable
Comments
For details about supported
software versions refer to the
compatibility matrix of the LC
& CE Drivers version in use
Safety Data Sheet in SAP:
4093-3577 Rev. A
40