Setting Up The Pump With The Instrument Control Interface; Overview; Instrument Configuration - Agilent Technologies 1290 Infinity II User Manual

3
Using the Pump

Setting up the Pump with the Instrument Control Interface

Setting up the Pump with the Instrument Control Interface

Overview

Parameters described in following sections are offered by the instrument
control interface and can usually be accessed through Agilent instrument
control software. For details, please refer to manuals and online help of
respective user interfaces.

Instrument Configuration

Use the Instrument Configuration dialog box to examine and, if necessary, modify
your instrument configuration. The Configurable Modules panel contains a list
of all modules available for configuration. The Selected Modules panel contains
the list of configured modules.
Auto Configuration: Under Communication settings, select either the Host Name
option or the IP address option and enter the appropriate value for the host
computer to enable automatic detection of the hardware configuration. The
system configures the instrument automatically with no further manual
configuration necessary.
The Binary Pump configuration parameters are in two sections:
• Communication
• Options
Communication: The parameters in this dialog box are detected automatically
during autoconfiguration.
• Device name,
• Type ID,
• Serial number,
• Firmware revision,
• Button Connection settings
50 1290 Infinity II High Speed Pump User Manual