Compensation Sensor Short - Agilent Technologies InfinityLab LC Series User Manual

6 Error Information
General Error Messages

Compensation Sensor Short

Error ID: 0080
The ambient-compensation sensor (NTC) on the power switch board in the
module has failed (open circuit).
The resistance across the temperature compensation sensor (NTC) on the
power switch board is dependent on ambient temperature. The change in
resistance is used by the leak circuit to compensate for ambient temperature
changes. If the resistance across the sensor falls below the lower limit, the error
message is generated.
Probable cause
1
2
Agilent InfinityLab LC Series 1260 Infinity II Isocratic and Quaternary Pumps User Manual
Defective power switch assembly.
Loose connection between the power switch
board and the mainboard.
Suggested actions
Please contact your Agilent service
representative.
Please contact your Agilent service
representative.
97