7.3 Setting up the machine
7.3.1 Lifting the machine
Important
Lift the stand without rolling using ONLY a lifting carriage or forklift!
7.3.2 Rolling the machine (optional)
Information
For in-house transport the stand can be equipped with 4 casters.
Fig. 180: Rolling the machine
(1) - Casters
(2) - Stand feet
To roll the machine:
1. To transport the machine on casters, loosen the nuts (3) of the stand
2. When transport is complete, loosen the stand feet (2) until the casters (1)
3. Tighten the nuts (3).
224
feet (2) and screw in the stand feet (2).
lift off the ground.
①
(3) - Nuts
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
Setup
③
②