Table of Contents
Advertisement
Programming
Naming a seam sequence
Fig. 72: Naming a seam sequence (1)
To enter a name for a seam sequence:
1. Press the button S02-S20 (depending on which seam sequence you
The display switches to a keypad.
Fig. 73: Naming a seam sequence (2)
2. Enter the desired sequence name.
3. Confirm with OK.
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
have selected).
You can enter up to 18 characters.
Every sequence must be given a name.
93
Advertisement
Table of Contents
