Table of Contents
Advertisement
Setup
7.6.5 Assembling the workpiece boxes (optional)
Fig. 188: Assembling the workpiece boxes
(1) - Clamping pieces with screws
(2) - Clamping lever
To assemble the workpiece boxes:
1. Slide the clamping pieces (1) onto the bar (3).
2. Align the height of the workpiece boxes.
3. Tighten the screws on the clamping pieces (1).
4. Loosen the clamping lever (2).
5. Align the workpiece boxes with the sewing station.
6. Tighten the clamping lever (2).
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
③
(3) - Bar
②
①
231
Advertisement
Table of Contents
