DURKOPP ADLER 745-35-10 B Operating Instructions Manual page 175

Programming
 The display switches to Touch calibration.
Fig. 136: Touch calibration
To carry out the touch calibration:
1. Successively press on the places indicated by the green arrow.
 Touch calibration is carried out.
OR:
1. Press Cancel.
 Touch calibration is canceled.
Information
Another option is to perform the touch calibration using the boot loader.
To do so, press your finger on the control panel while the control panel
boots up.
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
Touch calibration
The display returns to Adjust and test control panel.
The display returns to Adjust and test control panel.
173