DURKOPP ADLER 745-35-10 B Operating Instructions Manual page 92

Changing the seam sequence template
Fig. 68: Changing the seam sequence template (1)
To change the seam sequence template:
1. Press the S01 button.
 The display switches to Select source of sequence.
Fig. 69: Changing the seam sequence template (2)
 The destination sequence is grayed out and cannot be selected.
90
Selectable
sequences
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
Display of the sequence
content
Programming