Table of Contents
Advertisement
Setup
7.5 Setting the working height
The working height can be adjusted between 797 mm and 1138 mm
(measured to the upper edge of the tabletop).
The sewing unit has been set to the lowest working height of 797 mm at
the factory.
Fig. 183: Setting the working height
(1) - Screws
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
WARNING
Risk of injury from moving parts!
The tabletop can sink under its own weight when
the screws on the stand bars are loosened.
Crushing possible.
Ensure that your hands are not jammed when
loosening the screws.
CAUTION
Risk of musculoskeletal damage from incorrect
setting!
The operator can sustain musculoskeletal damage
if failing to comply with the ergonomic
requirements.
Adjust the working height to the body height of the
person who will operate the machine.
①
①
227
Advertisement
Table of Contents
