DURKOPP ADLER 745-35-10 B Operating Instructions Manual page 253

Troubleshooting
Error code Symbol
Error code 8000-8999: Error messages displays
8400 Information
8401 Information
8402 Information
8403 Information
8404 Information
8406 Information
8407 Information
8408 Information
8409 Information
8410 Information
8411 Information
8414 Information
8415 Information
Error code 9000-9999: Error messages displays
9000
9001
9002
9003
9007
9013
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
Meaning
No readable update-program for the control panel available.
The control panel program should be updated as soon as possible.
Continue with OK
No valid program for the machine available. Should a new program be
transmitted?
Machine has a program for another class. Should a new program be
transmitted?
Machine has an outdated program. Should a new program be
transmitted?
Update failed! Eventually the control panel program has to be reloaded.
Should the program be retransmitted nevertheless?
Update failed! Please check the interface to the machine. Should a new
update be tried nevertheless?
Update failed! Should the program be retransmitted?
Waiting for RESET by machine.
Switch off and on the machine again.
Update failed! Should the program be retransmitted?
Machine is checking new program. This process can take up to 30 sec.
Update completed!
Continue with old software. (If you use the old software, we cannot
guarantee that all functions will be available to the full extent.)
Reminder to execute the
reference run after switching on
Corner knife station swiveled out
during sewing
Folding station swiveled out
during sewing
Wrong needle position
Test the loading process
Tape missing
Remedial action
Press the left pedal backwards
Check/set fastening of corner knife
station
Check/set fastening of folding
station
Manually turn the handwheel to the
upper position of the thread lever
(top dead center)
Resuming the process after pushing
the start pedal
Insert tape  p. 42
251