DURKOPP ADLER 745-35-10 B Operating Instructions Manual page 129

Programming
 The display switches to Waiting position of transport clamp.
Fig. 102: Set waiting position of transport clamp
Symbols
To set the waiting position of the transport clamp:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
Set waiting position of transport clamp
Meaning
Waiting position of transport clamp On/Off
Set up to waiting pos. of transport clamp
• 1 mm - 515 mm
127