DURKOPP ADLER 745-35-10 B Operating Instructions Manual page 247

Troubleshooting
Error code Symbol
1055
1056
1058
1060
1061
1203
1302
1330
1342-1344
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
Meaning
Sewing motor overload
• Sewing motor blocked/not
moving freely
• Sewing motor defective
• Control defective
Sewing motor overtemperature
• Sewing motor not moving freely
• Sewing motor defective
• Control defective
Sewing motor speed
• Sewing motor defective
• Sewing motor excess current/
excess voltage
• Encoder defective
• Encoder defective
• Sewing motor excess current/
excess voltage
Sewing motor: Position not
reached
Sewing motor error
• Control not receiving pulses
from pulse encoder in motor
• Sewing motor blocked
• Encoder cable not connected
or defective
• Encoder defective
No answer from sewing motor
Error in the reference run
Remedial action
• Eliminate seizing/stiff movement
• Replace the sewing motor
• Replace the control
• Eliminate seizing
• Replace the sewing motor
• Replace the control
• Replace the sewing motor
• Replace the sewing motor cable
• Replace the encoder
• Replace sewing motor
• Replace the control
• Replace the sewing motor cable
• Replace the encoder
• Replace sewing motor
• Replace the control
• Check mechanical changes to
the machine (e.g. thread cutting
setting, belt tension)
• Check position of thread lever at
top dead center
• Switch off and on the machine
again
• Perform software update
 p. 208
• Check the cable from the pulse
encoder in the motor to the control
• Remove the blockage
• Check the encoder cable and
replace, if necessary
• Replace sewing motor
• Switch off and on the machine
again
• Perform software update
 p. 208
• Replace the control
• Switch off and on the machine
again
• Perform software update
 p. 208
• Replace the control
245