Table of Contents
Advertisement
Available languages
Available languages
WARNING
To avoid electric shock, ensure that the appliance circuit is open before changing the lamp.
(having circuit open means power is off)
•
First disconnect the power of appliance and ensure that appliance is cold.
•
Remove the glass protection by turning as indicated in the figure on the left side. If you have
difficulty in turning, then using plastic gloves will help you in turning.
•
Then remove the lamp by turning, install the new lamp with same specifications.
•
Reinstall glass protection, plug the power cable of appliance into electrical socket and complete
replacement. Now you can use your oven.
Type G9 Lamp
WARNING
This product contains a light source of energy efficiency class G.
You may solve the problems you may encounter with your product by checking the following points before
calling the technical service.
CHECK POINTS
In case you experience a problem about the oven, first check the table below and try out the suggestions.
CHAPTER 20. REPLACING OVEN LAMP
220-240 V, AC
15-25 W
Fig. 16
CHAPTER 21. TROUBLESHOOTING
Type E14 Lamp
66
220-240 V, AC
15 W
Fig. 17
Advertisement
Chapters
Table of Contents
