Chapter 17. Cleaning Of The Oven Glass - Kernau KBOS 641 B G User Manual

Figure 8.1
Open the door fully
by pulling the oven door
toward yourself. Then
perform unlock operation
by pulling the hinge lock
upwards with the aid of
screwdriver as indicated
in figure 8.1.
Reversely perform respectively what you did while opening door to reinstall oven door back.

CHAPTER 17. CLEANING OF THE OVEN GLASS

Your product may differ. Follow the appropriate step for your product.
1. Press the plastic latches on the left and right sides as shown in Figure 10 and lift the the profile by pulling
it towards you as shown in Figure 11. Glass will be free after the profile is removed as shown in Figure 12.
Carefully pull the glass that has become free toward you. If necessary, the middle glass can also be removed
in the same way. The outer glass is fixed to the oven door profile. You may easily clean the glasses after they
have been separated. Once the cleaning and maintenance is complete, you can replace the glasses and the
profile by performing the removal procedure in reverse. Make sure that the glass is inserted in the correct
direction and that the profile is seated properly.
Fig. 10
Figure 8.2
Set the hinge lock
to the widest angle
as in figure 8.2.
Adjust both hinges
connecting oven
door to the oven to
the same position.
Fig. 11
64
Figure 9.1
Later, close the
opened oven door
so that it will be in a
position to contact with
hinge lock as in
figure 9.1.
Figure 9.2
For easier removal
of oven door, when it
comes close to closed
position, hold the cover
with two hands as in
figure 9.2 and pull
upwards.
Fig. 12