Webasto DVS300 Operation & Maintenance Manual page 37

Intelligent Fast-Charging System
Fault or
Warning Fault or Warning Message
Code
116 PS2 General Failure
117 PS2 Overtemp Failure
118 DCBus VDC Too Low
119 DCBus VDC Too High
120 Nt Flt-lost Port X/Lost Main
121 Network Cfg Failure
126 Temp Sensor Failure
129 Power Imbalance
132 Invalid Pilot on Port A
133 Chrg VDC Port A Low
134 Chrg VDC Port A High
135 BMID A Vbat Too Low
136 BMID VDC Too High
31504-03-0101
GSE O&M for DVS300 / 330 / 330 IP55 / 400 and MVS330/400
Description
Power stage #2 (port B) has a current
sensor fault.
Power stage #2 (port B) temperature is
too high.
The common DC bus voltage is too low.
The common DC bus voltage is too high.
Network Fault
Lost Port X / Lost Main
The Charger has invalid network Configura-
tion.
The temperature sensor reading is invalid.
There is a power stage power imbalance in
500-A mode.
The battery is connected with an invalid
pilot circuit.
The battery voltage is too low for the charger
(power station).
The battery voltage is too high for the charger
(power station).
The battery voltage is too low for the BMID.
The battery voltage is too high for the BMID.
37 Webasto Charging Systems, Inc.
Action
Code
W
Y
X
X
GG
GG
NN
JJ
MM
Z
Z
L
L