System Startup - Webasto DVS300 Operation & Maintenance Manual

Intelligent Fast-Charging System
4.3 – System Startup
The DVS is ready to be powered on once it has been properly installed (mechanically and electrically). The
system performs a lamp test when first powered on. The display then shows the initial status window containing
the model number and software version. The system then sequences through two more status windows before
reaching the Charger Ready Connect Vehicle window (Figure 6). The windows for each charge port alternate
when initialization is complete.
NOTE
31504-03-0101
GSE O&M for DVS300 / 330 / 330 IP55 / 400 and MVS330/400
An arrow in the upper-left or -right corner of the window indicates which chan-
nel data currently are being displayed.
DVS 40kW
Version
Station unavailable
Please see system stat
Configuring network
Starting power server
Charger ready
Connect vehicle
Figure 6 – Startup Windows
500 Amps
xx.xx.xx.xx
19 Webasto Charging Systems, Inc.