7.7
Preparing vehicle for high temperatures or slow riding
7.8
Preparing the vehicle for low temperatures or snow
–
Make sure that no radiator covers (
–
Check the radiator cap.
Value on the radiator cap
»
If the indicated value does not correspond to the setpoint value:
V00814-01
–
Change the radiator cap.
–
Adjust the secondary drive to the road conditions.
Info
The engine oil heats up quickly when the clutch is operated
frequently due to an excessively high secondary ratio.
–
Clean the radiator fins.
–
Straighten the bent radiator fins carefully.
–
Check the coolant level. (
600868-01
–
Adjust the carburetor jetting and setting.
Info
The recommended carburetor tuning is available from your
authorized GASGAS Motorcycles workshop.
M01107-01
PREPARING FOR USE 7
p. 85) are installed.
1.8 bar (26 psi)
Warning
Danger of scalding During motorcycle operation,
the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or
other cooling system components if the engine
or the cooling system are at operating temper-
ature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area affected
immediately with lukewarm water.
p. 88)
23