11 SERVICE WORK ON THE CHASSIS
11.32
58
S04346-11
S04345-11
S04344-11
Checking for chain dirt accumulation
400678-01
Main work
–
Check the throttle cable routing. (
–
Position the fuel tank and fit the two spoilers to the sides of the radi-
ator mount.
–
Make sure that no cables or throttle cables are trapped or damaged.
–
1
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
2
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Mount fuel hose.
–
Position the fuel tank breather in the steering stem.
Finishing work
–
Mount the seat. (
p. 52)
–
Check the chain for coarse dirt accumulation.
»
If the chain is very dirty:
–
Clean the chain. (
p. 63)
with the rubber bushing.
M6
10 Nm (7.4 lbf ft)
.
M6
10 Nm (7.4 lbf ft)
p. 59)