Warning
Danger of poisoning Coolant is harmful to health.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
14.8
Refilling with coolant
Warning
Danger of poisoning Coolant is harmful to health.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
Condition
The engine is cold.
–
Position the motorcycle upright.
–
Place an appropriate container under the water pump cover.
–
1
Remove screw
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Coolant drain plug
S04351-11
Main work
–
Make sure that screw
–
Position the motorcycle upright.
–
Take off radiator cap
–
Completely fill the radiator with coolant.
Coolant (
p. 117)
S04351-11
COOLING SYSTEM 14
2
. Take off radiator cap
.
1
with a new seal ring.
M6
8 Nm (5.9 lbf ft)
1
is tightened.
2
.
89