JDS Uniphase Wavetek DSAM-3500B Quick Start Manual page 40

Chapter 2 DSAM Meter Operation
Configuring the Meter
24
Figure 11 Configure Mode General Menu
Configure modes are indicated by softkey tabs at the
bottom of the display screen – General, Measure,
Channel Plan, and Access. Each configuration mode has
a menu of configurable items specific to that mode.
To access a Configure Mode menu, press the softkey
directly below the mode you wish to view. The Configure
General menu is displayed when you press the Configure
mode key for the first time. After that, the meter will display
the most recently displayed Configure Mode each time
you return to the configuration menus by pressing the
Configure mode key.
When you have displayed the mode menu you prefer, use
the arrow keys to highlight the item you intend to configure
and press Enter.
DSAM Product Family Quick-Start Guide Rev. 001