Using The Mode Keys - JDS Uniphase Wavetek DSAM-3500B Quick Start Manual

Chapter 2 DSAM Meter Operation
Using the Keypad
Using the
mode keys
18
– An Enter key used to select highlighted menu items
and input alphanumeric data
– An Exit key used to depart from the currently viewed
screen to a previously viewed option
– Four Mode keys
meter's four primary functional modes
– Twelve Alphanumeric keys used for data entry and
for shortcut access to specific features (as a shift key
function)
– A Shift key used in conjunction with the alpha-
numeric keys or the display softkeys for shortcut
access to specific features
– A Power key used to turn the meter on and off.
Use the mode keys
level menu of features associated with each mode.
Figure 5 DSAM Meter Mode Keys
Press the AutoTest mode key to display the AutoTest
mode menu (see
Press the Measure mode key to display the Measure
mode menu (see
Press the Access mode key to display the Access mode
menu (see Figure 35 on page
Press the Configure mode key to display the Configure
mode menu (see
DSAM Product Family Quick-Start Guide Rev. 001
(Figure 5) used to access the
(Figure 5) to directly access the top
Figure 29 on page
Figure 15 on page
48).
Figure 11 on page
42).
30).
24).