Using Proof Of Performance - JDS Uniphase Wavetek DSAM-3500B Quick Start Manual

Chapter 2 DSAM Meter Operation
Using AutoTests Mode
Figure 32 Home Certification Autotest Mode
Screen
Each Home Certification AutoTest is based on three types
of configuration:
– The parameters or the selected channel plan
– The parameters of the selected limit plan
– The parameters of the selected data plan
After a channel plan and a limit set has been selected,
press the Start softkey and Home Certification Autotest
measures the signal performance of all assigned channels
in the Home Certification Autotest configuration.
Using Proof of
To access Proof of Performance, use the arrow keys to
Performance highlight the Proof of Performance option on the AutoTests
mode menu (Figure 29 on page 42), and press Enter. The
first Proof of Performance AutoTest mode screen you see
will look similar to the Combo AutoTest screen shown in
Figure 33 on page 46.
DSAM Product Family Quick-Start Guide Rev. 001 45