Value 1 To 4 Display; Decimal Places 1 To 4 - Endress+Hauser Levelflex FMP50 PROFIBUS PA Operating Instructions Manual

Levelflex FMP50 PROFIBUS PA

Value 1 to 4 display

Navigation
Description
Selection
Factory setting

Decimal places 1 to 4

Navigation
Description
Selection
Factory setting
Additional information
* Visibility depends on order options or device settings
Endress+Hauser
 Setup → Advanced setup → Display → Value 1 display
Select the measured value that is shown on the local display.
• Level linearized
• Distance
*
• Interface linearized
*
• Interface distance
*
• Thickness upper layer
• Terminal voltage
• Electronic temperature
• Measured capacitance
• Analog output 1
• Analog output 2
• Analog output 3
• Analog output 4
• Analog output adv. diagnostics 1
• Analog output adv. diagnostics 2
For level measurements
• Value 1 display: Level linearized
• Value 2 display: Distance
• Value 3 display: Current output 1
• Value 4 display: None
 Setup → Advanced setup → Display → Decimal places 1
Select the number of decimal places for the display value.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
x.xx
The setting does not affect the measuring or computational accuracy of the device.
*
Operating menu


165