Switch-Off Delay; Failure Mode; Switch Status; Invert Output Signal - Endress+Hauser Levelflex FMP50 PROFIBUS PA Operating Instructions Manual

Levelflex FMP50 PROFIBUS PA

Switch-off delay

Navigation
Prerequisite
Description
User entry
Factory setting

Failure mode

Navigation
Prerequisite
Description
Selection
Factory setting
Additional information

Switch status

Navigation
Description

Invert output signal

Navigation
Description
Selection
Factory setting
Endress+Hauser
 Setup → Advanced setup → Switch output → Switch-off delay
• Switch output function (→  157) = Limit
• Assign limit (→  158) ≠ Off
Define delay for the switch-off of status output.
0.0 to 100.0 s
0.0 s
 Setup → Advanced setup → Switch output → Failure mode
Switch output function (→  157) = Limit or Digital Output
Define output behavior in alarm condition.
• Actual status
• Open
• Closed
Open
 Setup → Advanced setup → Switch output → Switch status
Shows the current switch output status.
 Setup → Advanced setup → Switch output → Invert output signal
Invert the output signal.
• No
• Yes
No
Operating menu



161