Incoming Acceptance And Product; Identification; Incoming Acceptance; Product Identification - Endress+Hauser Levelflex FMP50 PROFIBUS PA Operating Instructions Manual

Incoming acceptance and product identification
18
4

Incoming acceptance and product

identification

4.1

Incoming acceptance

Upon receipt of the goods check the following:
• Are the order codes on the delivery note and the product sticker identical?
• Are the goods undamaged?
• Do the nameplate data match the ordering information on the delivery note?
• If required (see nameplate): Are the Safety Instructions (XA) present?
If one of these conditions is not satisfied, contact your Endress+Hauser Sales Center.
4.2

Product identification

The following options are available for identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
• Enter serial numbers from nameplates in W@M Device Viewer
( www.endress.com/deviceviewer
displayed.
• Enter the serial number from the nameplates into the Endress+Hauser Operations App
or scan the 2-D matrix code (QR code) on the nameplate with the Endress+Hauser
Operations App: all the information for the measuring device is displayed.
Levelflex FMP50 PROFIBUS PA
): All information about the measuring device is
Endress+Hauser