Switch-On Delay; Switch-Off Value - Endress+Hauser Levelflex FMP50 PROFIBUS PA Operating Instructions Manual

Operating menu

Switch-on delay

Navigation
Prerequisite
Description
User entry
Factory setting

Switch-off value

Navigation
Prerequisite
Description
User entry
Factory setting
Additional information
160
A Switch-on value
B Switch-off value
C Output closed (conductive)
D Output opened (non-conductive)
 Setup → Advanced setup → Switch output → Switch-on delay
• Switch output function (→  157) = Limit
• Assign limit (→  158) ≠ Off
Define delay for the switch-on of status output.
0.0 to 100.0 s
0.0 s
 Setup → Advanced setup → Switch output → Switch-off value
Switch output function (→  157) = Limit
Enter measured value for the switch-off point.
Signed floating-point number
0
The switching behavior depends on the relative position of the Switch-on value and
Switch-off value parameters; description: see the Switch-on value parameter
(→  159).
B
A
Levelflex FMP50 PROFIBUS PA
t
C
D
t
Endress+Hauser
A0015586

