Value 1 To 4 Display; Decimal Places 1 To 4; Display Interval - Endress+Hauser Levelflex FMP53 HART Operating Instructions Manual

Operating menu

Value 1 to 4 display

Navigation
Description
Selection
Factory setting

Decimal places 1 to 4

Navigation
Description
Selection
Factory setting
Additional information

Display interval

Navigation
Description
* Visibility depends on order options or device settings
162
 Setup → Advanced setup → Display → Value 1 display
Select the measured value that is shown on the local display.
• Level linearized
• Distance
*
• Interface linearized
*
• Interface distance
*
• Thickness upper layer
• Current output 1
• Measured current
*
• Current output 2
• Terminal voltage
• Electronic temperature
*
• Measured capacitance
• Analog output adv. diagnostics 1
• Analog output adv. diagnostics 2
For level measurements
• Value 1 display: Level linearized
• Value 2 display: Distance
• Value 3 display: Current output 1
• Value 4 display: None
 Setup → Advanced setup → Display → Decimal places 1
This selection does not affect the measurement and calculation accuracy of the device.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
x.xx
The setting does not affect the measuring or computational accuracy of the device.
 Setup → Advanced setup → Display → Display interval
Set time measured values are shown on display if display alternates between values.
Levelflex FMP53 HART


Endress+Hauser