Table of Contents
Advertisement
Compatible Gases
Air, argon, Air, argon, butane, carbon dioxide, ethane, ethene, Freon 12, Freon
22, Freon 32, Freon 114, Freon 116, Freon 125, Freon 134A, Freon 152, helium,
hydrogren, krypton, natural gas, neon, nitrogen, oxygen, propane, propene,
SF6, and xenon. Carbon dioxide requires a custom Sensor assembly. Contact
the factory to confirm compatibility with other gases.
3050-RM Moisture Analyzer Specifications
Specification
Range
Limit of Detection
Accuracy
Response Time
Sample Inlet Pressure
Requirement
Exhaust Pressure
Sample Flow Requirement Approximately 150 SCCM in sample saver mode.
Inlet Gas Temperature
Outputs
PN 305892901, Rev S
Specifications
All specifications subject to change without notice.
Read the Dryer Warning in the "Special Warnings and Information"
section in the beginning of this manual for more information.
Description
Calibrated range of 0–2500 PPMV.
0.1 PPMV nominal.
±10 % of reading OR 0.1 PPMV, whichever is greater.
Typical 63 % of a step change in either direction in less than
5 minutes.
138–345 kPa (20–50 PSIG)
0–103 kPa (0–15 PSIG)
Approximately 1 SLPM with bypass open.
0 °C to 100 °C (32 °F to 212 °F)
Optimal results are obtained when inlet gas temperature is
maintained at 60 °C (140 °F).
4-line x 20-character LCD display.
One (1) 4–20 mA DC analog output.
RS-232/RS-485 serial port.
|
Specifications
5-1
Advertisement
Table of Contents
