Analyzer Installation; User-Supplied Items Interconnect Wiring; External Sample Tubing - Ametek 3050-RM User Manual

Moisture analyzer

Hide thumbs Also See for 3050-RM:

Table of Contents

Analyzer Installation

The user must supply all wiring for serial communication, analog output, and

alarm relays. Recommended wire is 22 gauge, twisted/shielded pair.



2-6 | 3050-RM Moisture Analyzer

Consult plant safety personnel for appropriate exhaust venting guide-

lines for specific Sample gas type.

Sample input tubing length should be as short as possible.

For optimum performance, sample tubing should be thermally con-

trolled to maintain a constant Sample Inlet temperature. Optimal

results are obtained with the sample line maintained at 60 °C.

Recommended Sample gas input tubing is 1/8-inch OD, electropol-

ished 316L VAR stainless steel (AMETEK Part No. 257707000) or equiva-

lent.

Exhaust pressure must be 0–15 PSIG.

PN 305892901, Rev S

Table of Contents