Polypshift (Poly Pitch Shifter) - Roland VC-2 Owner's Manual

Creating/Editing Patches (Patch Menu)
Mod Ctrl
Refer to "Controllers" (p. 55).
Formant
* This parameter is not available if the patch algorithm is
Vocoder~ or Processor Type 2.
Parameter Value
Type FLAT–
STFEM2
Tone
* This parameter is not available if the patch algorithm is
Vocoder~ or Processor Type 2.
Parameter Value Explanation
Tone 0–127 Adjusts the brightness of the sound.
HoldDump
Parameter Value Explanation
Time 0–127 Specifies the time from when the hold
pedal is pressed to fix the tonal character
from INPUT until that sound disappears.
AutoNote
* This parameter is not available if the patch algorithm is
Keyboard~ or Processor~.
Parameter Value Explanation
Switch OFF, If this is on, the pitch from the mic input
ON will be detected, allowing you to play the
VC-2 without having to play the keyboard
(i.e., without inputting note data).

PolyPShift (Poly Pitch Shifter)

This menu is available only for patches whose patch
algorithm is Poly PShift.
OSC1/OSC2
Parameter Value
Switch OFF,
ON
FmtStyl FLAT–
IMPROV
54
Explanation
Selects the type of formant.
Explanation
Switches OSC2 on/off.
Selects the style of vocal character (for-
mant).
Parameter Value
Formant -63– +63
Level 0–127
Pan L64–0–
63R
Formant -200–
KF +200
PPS
Parameter Value Explanation
Level 0–127 Adjusts the output level of the poly pitch
shifter.
LvMod- -63– Adjust the output level of the poly pitch
Depth +63 shifter using the controller assigned by
Mod Ctrl.
Natural
Parameter Value Explanation
Level 0–127 Adjusts the output level of the natural
voice (your own unprocessed voice).
RevSend 0–127 Adjusts the reverb send level.
LvMod- -63– Adjust the output level of the natural
Depth +63 voice using the controller assigned by
Mod Ctrl.
PPS/Natural
Parameter Value Explanation
→ p. 55
Mod Ctrl Refer to "Controllers" (p. 55).
Unvoice
Parameter Value Explanation
Level 0–127 Specifies the amount of the detected un-
voiced consonants that will be mixed into
the output of the vocoder.
Detect 1–50 Adjusts the sensitivity at which unvoiced
consonants are detected.
OSC1Pitch~Bender
Refer to "Carr (Carrier)" OSC1Pitch (p. 50) through
Bender (p. 52).
AutoNote
Parameter Value Explanation
Switch OFF, If this is on, the pitch from the mic input
ON will be detected, allowing you to play the
VC-2 without having to play the keyboard
(i.e., without inputting note data).
Explanation
Adjusts the width of formant change.
Adjusts the output volume.
Specifies the pan of the patch. "L64" is
far left, "0" is center, and "63R" is far
right.
Specifies the amount by which the for-
mant value will be affected by the key
you play.