Poly Pitch Shifter Screen; Osc - Roland VC-2 Owner's Manual

Creating/Editing Patches (Patch Mode)
Vocoder Screen
You can go to the top screen by touching <Vocoder> in the
lower part of the screen.
Patches whose patch algorithm is Poly PShift do not
have this screen.
VOCODER
Parameter Value Explanation
Level 0–127 Adjusts the output level of the vocoder.
Atk 0–100 Adjusts the attack time of the vocoder.
* This parameter is not available if the
patch algorithm is Vocoder~ or Proces-
sor Type 2.
Rel 0–100 Specifies the time from when the vocoder
begins to operate until the volume reaches
0.
* This parameter is not available if the
patch algorithm is Vocoder~ or Proces-
sor Type 2.
LevelMod- -63– Adjust the output level of the vocoder us-
Depth +63 ing the controller assigned by Controller
(p. 29).
NATURAL VOICE
Parameter Value Explanation
Level 0–127 Specifies the output level of the natural
voice (your unprocessed voice, or the orig-
inal sound of the wave for Keyboard~
patch algorithms).
RevSend 0–127 Adjusts the reverb send level.
LevelMod- -63– Adjust the output level of the natural
Depth +63 voice using the controller assigned by
Controller (p. 29).
UNVOICE
* This parameter is not available if the patch algorithm is
Vocoder~ or Processor Type 2.
Parameter Value Explanation
Level 0–127 Specifies the amount of the detected un-
voiced consonants that will be mixed into
the output of the vocoder.
Detect 1–50 Adjusts the sensitivity at which unvoiced
consonants are detected.
28
Formant
* This parameter is not available if the patch algorithm is
Vocoder~ or Processor Type 2.
Parameter Value
Type 00: FLAT–
15: STFEM2
TONE
* This parameter is not available if the patch algorithm is
Vocoder~ or Processor Type 2.
Parameter Value Explanation
Tone 0–127 Adjusts the brightness of the sound.
Hold Dump
Parameter Value Explanation
Time 0–127 Specifies the time from when the hold
pedal is pressed to fix the tonal character
from INPUT until that sound disappears.
AutoNoteSw
* This parameter is not available if the patch algorithm is
Keyboard~ or Processor~.
If this is on, the pitch from the mic input will be detected,
allowing you to play the VC-2 without having to play the
keyboard (i.e., without inputting note data).

Poly Pitch Shifter Screen

In the case of a patch whose patch algorithm is Poly PShift,
you can access the Wave screen by touching <Poly Pitch
Shifter> in the lower part of the screen.

OSC

OSC 1/OSC 2
Parameter Value
Formant 00: FLAT–
Style 10: IMPROV
Formant -63– +63
Level 0–127
Pan L64–0–63R
Explanation
Selects the type of formant.
Explanation
Selects the style of vocal character
(formant).
Adjusts the width of formant
change.
Adjusts the output volume.
Specifies the pan of the patch. "L64"
is far left, "0" is center, and "63R" is
far right.