Wave - Roland VC-2 Owner's Manual

Wave

This menu is available only for patches whose patch
algorithm is Keyboard~.
OSC Wave
Parameter Value
Wav —
Tempo OFF,
Sync ON
KeyMod NORMAL,
ALWAYS
VARI Pitch
Parameter Value Explanation
Pitch -63– Adjusts the pitch.
+63
Mod Depth -63– Adjust the pitch using the controller as-
+63 signed by Mod Ctrl.
→ p. 55
Mod Ctrl Refer to "Controllers" (p. 55).
VARI Time
Parameter Value Explanation
Time -63– This sets the range of change in playback
+63 speed (time).
Mod Depth -63– Adjust the range of change in playback
+63 speed using the controller assigned by
Mod Ctrl.
→ p. 55
Mod Ctrl Refer to "Controllers" (p. 55).
VARIFormant
Parameter Value Explanation
Formant -63– This sets the range of change in vocal
+63 quality (formant).
Mod Depth -63– Adjust the range of change in vocal qual-
+63 ity using the controller assigned by Mod
Ctrl.
→ p. 55
Mod Ctrl Refer to "Controllers" (p. 55).
TVA
Parameter Value Explanation
Level 0–127 Specifies the volume of the wave.
Explanation
Selects a preset or imported wave.
Specifies whether the wave will be
sounded in sync with the tempo
clock (ON) or not (OFF).
NORMAL: Begin sounding when
you press a key, and stop sounding
when you release the key.
ALWAYS: Begin sounding when
you first press a key, and continue
sounding.
Creating/Editing Patches (Patch Menu)
Parameter Value Explanation
Lvl -63– Adjust the volume of the wave using the
ModDepth +63 controller assigned by Mod Ctrl.
→ p. 55
Mod Ctrl Refer to "Controllers" (p. 55).
Vocoder
Patches whose patch algorithm is Poly PShift do not
have this menu.
Vocoder
Parameter Value Explanation
Level 0–127 Adjusts the output level of the vocoder.
Attack 0–100 Adjusts the attack time of the vocoder.
* This parameter is not available if the
patch algorithm is Vocoder~ or Proces-
sor Type 2.
Release 0–100 Specifies the time from when the vocoder
begins to operate until the volume reaches
0.
* This parameter is not available if the
patch algorithm is Vocoder~ or Proces-
sor Type 2.
Lvl -63– Adjust the output level of the vocoder us-
ModDepth +63 ing the controller assigned by Mod Ctrl.
Natural
Parameter Value Explanation
Level 0–127 Specifies the output level of the natural
voice (your unprocessed voice, or the orig-
inal sound of the wave for Keyboard~
patch algorithms).
RevSend 0–127 Adjusts the reverb send level.
Lvl -63– Adjust the output level of the natural
ModDepth +63 voice using the controller assigned by
Mod Ctrl.
Unvoice
* This parameter is not available if the patch algorithm is
Vocoder~ or Processor Type 2.
Parameter Value Explanation
Level 0–127 Specifies the amount of the detected un-
voiced consonants that will be mixed into
the output of the vocoder.
Detect 1–50 Adjusts the sensitivity at which unvoiced
consonants are detected.
53