Carrier Screen For Processor~ Patch Algorithms; Tva; Wave Screen; Osc - Roland VC-2 Owner's Manual

Roland vc-2 vocal designer: owners manual
Hide thumbs Also See for VC-2:
Table of Contents

Advertisement

Parameter
Value
Time
0–127
BENDER
Parameter
Value
Explanation
Range
0–48
Specifies the degree of pitch change in
semitones when the Pitch Bend lever is all
the way left/right. For example if this is
set to "48" and you move the pitch bend
lever all the way to the left, the pitch will
fall 4 octaves. If this parameter is set to
"12," the pitch will rise one octave when
the pitch bend lever is moved to the right-
most position.
Carrier Screen for Processor~
Patch Algorithms

TVA

Level
Parameter
Value
Explanation
Level
0–127
Specifies the volume of the patch.
ModDepth
-63–
Adjusts the volume of the patch by the
+63
controller assigned by Controller (p. 29).
Pan
Parameter
Value
Pan
L64–
0–63R
ModDepth
-63–
+63
Explanation
When portamento is used, this spec-
ifies the time over which the pitch
will change. Higher settings will
cause the pitch change to the next
note to take more time.
Explanation
Specifies the pan of the patch. "L64" is
far left, "0" is center, and "63R" is far
right.
Adjusts the pan of the patch by the con-
troller assigned by Controller (p. 29).
Creating/Editing Patches (Patch Mode)

Wave Screen

In the case of a patch whose patch algorithm is Keyboard~,
you can access the Wave screen by touching <Wave> in the
lower part of the screen.

OSC

WAVE
Parameter
Value
Wave
Tempo
OFF,
Sync
ON
Key Mode
NORMAL,
ALWAYS

VARI

Parameter
Value
Explanation
Pitch
-63–
Adjusts the pitch.
+63
ModDepth
-63–
Adjust the pitch using the controller as-
+63
signed by Controller (p. 29).
Time
-63–
This sets the range of change in playback
+63
speed (time).
ModDepth
-63–
Adjust the range of change in playback
+63
speed using the controller assigned by
Controller (p. 29).
Formant
-63–
This sets the range of change in vocal qual-
+63
ity (formant).
ModDepth
-63–
Adjust the range of change in vocal quali-
+63
ty using the controller assigned by Con-
troller (p. 29).
TVA
Parameter
Value
Explanation
Level
0–127
Specifies the volume of the wave.
ModDepth
-63–
Adjust the volume of the wave using the
+63
controller assigned by Controller (p. 29).
Explanation
Selects a preset or imported wave.
Specifies whether the wave will be
sounded in sync with the tempo
clock (ON) or not (OFF).
NORMAL: Begin sounding when
you press a key, and stop sounding
when you release the key.
ALWAYS: Begin sounding when
you first press a key, and continue
sounding.
27

Advertisement

Table of Contents
loading

Table of Contents