Table of Contents
Advertisement
* The Time Trip effect is available only when you're playing a
patch whose patch algorithm (p. 7) is Keyboard~.
[ASSIGNABLE]
Switches to the effect that is specified for each patch.
[HOLD]
Switches hold on/off for the effect controlled by the Time
Trip pad.
* For details, refer to the V-Synth owner's manual.
V-LINK
5
When using the VC-2, this button turns the Talk Switch
function on/off. If this is on, the output of the VC-2 (V-
Synth) will stop, and the mic input will be sent through to
the MAIN OUT. This is convenient when you want to use
the mic connected to the VC-2 (V-Synth) to deliver
monologues or make announcements on stage between
songs.
* V-LINK functionality cannot be used on the VC-2.
6
ASSIGNABLE CONTROL
You can assign a variety of parameters and functions to
the two knobs (C1, C2), and use them to modify the
sound in realtime.
7
ARPEGGIO
Here you can control the Chord Memory on the VC-2.
[TEMPO]
Adjusts the tempo of the patch.
[ON/OFF]
Switches the Chord Memory on/off.
[HOLD]
Switches the Chord Memory hold on/off.
KEYBOARD
8
Here you can change the pitch range of the keyboard.
* This operates only when [TRANSPOSE] is lit.
* This does not work with Chord Memory (p. 36).
[TRANSPOSE]
Specifies transposing the keyboard in semitone steps.
Pressing this button while holding down [-OCT] or
[+OCT] allows you to set the desired amount of
transposition.
[-OCT], [+OCT]
These buttons adjust the pitch of the keyboard in octave
steps.
PATCH PALETTE
9
Here you can register and recall your favorite patches.
[NUMBER] (1-8)
These buttons let you select/register your favorite
patches.
[BANK]
You can change the Patch Palette bank by holding down
this button and pressing [NUMBER] (1-8)
[PATCH ASSIGN]
If you hold down this button and press [NUMBER] (1--8),
the currently selected patch (including the mic setting)
will be registered as a favorite patch.
* This is available only in the top screen (p. 14) of Patch mode.
10
Display
This displays information regarding the operation you
are performing.
11
VALUE Dial
This is used to modify values. If you hold down [SHIFT]
as you turn the VALUE dial, the value will change in
greater increments.
Panel Descriptions
11
Advertisement
Table of Contents
