Route (Routing); Mfx; Rev (Reverb); Cho (Chorus) - Roland VC-2 Owner's Manual

Controller
Select the controller used by ModDepth or ~ModDepth.
OFF: Control will not be used.
CC01–31, 33–95: Controller numbers 1–31, 33–95
BEND: Pitch Bend, AFT: Aftertouch
C2: TIME (C2) knob, C3: FORMANT (C3) knob
VELO: Velocity, KEYF: Key Follow
* VELO and KEYF do not exist in the wave menu Mod
Ctrl or for patches whose patch algorithm is
Processor~.
BREATH: Volume of the mic input

Route (Routing)

Effect Sw
Parameter Value

MFX

OFF, ON
Reverb OFF, ON
Chorus OFF, ON
MFX
Parameter Value Explanation
Level 0–127 Adjusts the volume of the sound that has
passed through the MFX.
Reverb 0–127 Adjusts the amount of reverb for the
Send sound that passes through MFX. If you
don't want to add the Reverb effect, set it
to "0."
Chorus 0–127 Adjusts the amount of chorus for the
Send sound that passes through MFX. If you
don't want to add the Chorus effect, set it
to "0."
Reverb
Parameter Value Explanation
Level 0–127 Adjusts the volume of the sound that has
passed through the reverb.
Chorus
Parameter Value Explanation
Level 0–127 Adjusts the volume of the sound that has
passed through the chorus.
Reverb 0–127 Adjusts the amount of reverb for the
Send sound that passes through chorus. If you
don't want to add the Reverb effect, set it
to "0."
Explanation
Switches MFX on and off.
Switches chorus on and off.
Switches reverb on and off.
Creating/Editing Patches (Patch Menu)
MFX
Use this parameter to select from among the 41 available MFX.
For details on MFX parameters, refer to "MFX Parameters"
(p. 70).
Value: 00 (Thru)–41
In this setting screen, you can edit the parameters of the MFX
that is selected by the MFX Type setting. For details on the
parameters that can be edited, refer to "MFX Parameters" (p.
70).

Rev (Reverb)

Use this parameter to select from among the 14 available
reverb. For details on reverb parameters, refer to "Reverb
Parameters" (p. 89).
Value: 00 (Off)–14
In this setting screen, you can edit the parameters of the
reverb that is selected by the REV Type setting. For details on
the parameters that can be edited, refer to "Reverb
Parameters" (p. 89).

Cho (Chorus)

Use this parameter to select from among the 8 available
chorus. For details on chorus parameters, refer to "Chorus
Parameters" (p. 88).
Value: 00 (Off)–08
In this setting screen, you can edit the parameters of the
chorus that is selected by the CHO Type setting. For details on
the parameters that can be edited, refer to "Chorus
Parameters" (p. 88).
55