Selecting A Patch; Selecting Patches With The Value Dial; Selecting Patches From The List; Selecting Patches With Patch Palette - Roland VC-2 Owner's Manual

Try Out the Sounds
If the patch algorithm is Processor Type 2
For details on how to make connections, refer to "INPUT
Jacks (L, R)" (p. 13).
Parameter Value Explanation
MIC Level 0–127 Adjusts the output level of the mic to the
vocoder.
Carrier 0–127 Adjusts the output level of the carrier to
Level the vocoder.
Vocoder 0–127 Adjusts the tone (brightness) of the vocod-
Tone er.
Vocoder 0–127 Adjusts the output level of the vocoder.
Level
Vocoder 0–127 Adjusts the output level of the natural
Natural voice (your own unprocessed voice).
Voice

Selecting a Patch

Selecting Patches with the VALUE dial

1. Access the top screen of Patch mode. (p. 14)
2. Touch the patch number indication to highlight
it.
3. Turn the VALUE dial or press [INC/+], [DEC/-].
You can switch more rapidly by holding down [SHIFT]
while you perform these operations.

Selecting Patches from the List

You can easily find the desired patch by selecting it from the
patch list.
1. Access the top screen of Patch mode. (p. 14)
2. Touch the patch algorithm indication located in
the upper left of the screen. Alternatively, touch
<▼MENU> in the upper right of the screen and
then touch <PATCH List> in the pulldown
menu.
The PATCH List window appears.
3. Select a patch from the list.
Either turn the VALUE dial or use [INC/+], [DEC/-] to
16
select a patch. You can also select a patch by touching it
on the display.
The on-screen keys have the following functions.
<P001–U192>: Change the buttons at both edges of the
screen to P001–U192.
<U193–U448>: Change the buttons at both edges of the
screen to U193–U448.
<Algorithm>: Change the buttons at both edges of the
screen to Patch Algorithm (p. 7).
< << >: Return to the preceding screen page.
< >> >: Advance to the next screen page.
4. Touch <OK> to select the patch.

Selecting Patches with Patch Palette

You can select patches of currently selected Patch Bank
instantly by simply pressing NUMBER [1]-[8].
1. Access the top screen of Patch mode. (p. 14)
2. Press NUMBER [1]-[8] to select a patch. To
switch between patch palette banks, hold down
[BANK] and press NUMBER [1]-[8].