Table of Contents
Advertisement
Panel Descriptions
Front Panel
fig.variosPanelFront
A
A. PC CARD Slot
Insert the VC-2 card into this slot.
* Carefully insert the PC card all the way in-until it is firmly in
place.
* Never insert or pull out while the VC-2 (VariOS) is turned on.
B. PITCH / TIME / FORMANT Knobs
PITCH (C1)
Adjusts the input level after the signal has passed
through the pre-effect (p. 58). If the patch algorithm
(p. 7) is Keyboard~, this adjusts the output level of
the wave. For other patch algorithms, this adjusts
the volume of the input from the INPUT jack.
TIME (C2)
You can assign a variety of parameters and func-
tions to the two knobs (C2, C3), and use them to
FORMANT
modify the sound in realtime.
(C3)
C. Indicators
MIDI
Lights when a MIDI message is received.
TEMPO
Blinks at the tempo.
PC
Lights when the MIDI mode of the VC-2 is "PC" (p. 47).
USB
Lights when connected to a computer via USB.
D. Display
Various information is shown here according to the operations
you perform.
E. MENU Button
Accesses the various functions of the VariOS. (p. 47)
44
B
D
C
F. EXIT Button
Returns you to the previously displayed screen. Depending on
the content of the menu, this button also functions as
CANCEL.
G. CURSOR Buttons
Used to move the cursor.
H. VALUE Dial
Turn this dial to edit a value. Pressing the VALUE dial will
function as ENTER (confirm). If you turn the VALUE dial
while pressing it, the value will change in larger steps.
I. VOLUME Knob
Adjusts the overall volume that is output from the MAIN
OUT jacks and the PHONES jack. By pressing the VOLUME
knob you can audition (preview) the current patch.
J. PHONES Jack
You can connect a set of headphones to this jack. Use
headphones with an impedance in the range of 32 - 600 ohms.
K. POWER Switch
Turns the power of the VC-2 (VariOS) on/off.
E F
G
I
H
J
K
Advertisement
Table of Contents
