Pitch / Eq Growl / Tva / Ctrl - Roland VC-2 Owner's Manual

Parameter Value
FmtKF -200– +200
OSC 2 OFF,
switch ON
POLY PITCH SHIFTER
Parameter Value Explanation
Level 0–127 Adjusts the output level of the poly pitch
shifter.
ModDepth -63– Adjust the output level of the poly pitch
+63 shifter using the controller assigned by
Controller (p. 29).
NATURAL VOICE
Parameter Value Explanation
Level 0–127 Adjusts the output level of the natural
voice (your own unprocessed voice).
RevSend 0–127 Adjusts the reverb send level.
ModDepth -63– Adjust the output level of the natural
+63 voice using the controller assigned by
Controller (p. 29).
UNVOICE
Parameter Value Explanation
Level 0–127 Specifies the amount of the detected un-
voiced consonants that will be mixed into
the output of the vocoder.
Detect 1–50 Adjusts the sensitivity at which unvoiced
consonants are detected.

PITCH / EQ GROWL / TVA / CTRL

Refer to PITCH (p. 25), EQ GROWL (p. 25), TVA (p. 25),
and CTRL (p. 26) in the "Carrier Screen."
AutoNoteSw
If this is on, the pitch from the mic input will be detected,
allowing you to play the VC-2 without having to play the
keyboard (i.e., without inputting note data).
Explanation
Specifies the amount by which the
formant value will be affected by
the key you play.
Switches OSC2 on/off.
Creating/Editing Patches (Patch Mode)
Controller
Select the controller used by ModDepth or ~ModDepth.
OFF: Control will not be used.
CC01–31, 33–95: Controller numbers 1–31, 33–95
BEND: Pitch Bend, AFT: Aftertouch
+PAD-X: The center of the time trip pad is 0; toward the
right is +, and toward the left is -
+PAD-Y: The center of the time trip pad is 0; upward is +,
and downward is -
PAD-X: The left edge of the time trip pad is 0; toward the
right is +
PAD-Y: The bottom edge of the time trip pad is 0;
upward is +
* +PAD-X, +PAD-Y, PAD-X, and PAD-Y will function
when the front panel TIME TRIP PAD [ASSIGNABLE]
indicator is lit.
TRIP-R: The outer edge of the time trip pad is 0; toward
the center is +
* TRIP-R functions only when the front panel TIME TRIP
PAD [TIME TRIP] indicator is lit.
BEAM-L: D Beam controller (left)
BEAM-R: D Beam controller (right)
* BEAM-L/R functions only when the front panel D
BEAM [ASSIGNABLE] indicator is lit.
KNOB1: C1 knob, KNOB2: C2 knob
VELO: Velocity, KEYF: Key Follow
* VELO and KEYF do not exist in the wave screen
Controller or for patches whose patch algorithm is
Processor~.
BREATH: Volume of the mic input
29