Roland VC-2 Owner's Manual page 80

Roland vc-2 vocal designer: owners manual
Hide thumbs Also See for VC-2:
Table of Contents

Advertisement

Effects List
24: Digital Phaser
Phaser is an effect that adds a phase-shifted sound to the
original sound to create time-varying change, modulating the
sound.
Parameter
Value
Shift Mode
4STAGE,
8STAGE
Level
Level
Manual
0–127
Rate
0.05–10.0 Hz,
note
Depth
0–127
Phase
NORM, INV
Resonance
0–127
Mix Level
0–127
Ps Low Freq
50–4000 Hz
Ps Low Gain
-15– +15 dB
Ps Hi Freq
2000–20000 Hz
Ps Hi Gain
-15– +15 dB
25: Rotary
The Rotary effect simulates the sound of the rotary speakers
often used with the electric organs of the past. Since the
movement of the high range and low range rotors can be set
independently, the unique type of modulation characteristic
of these speakers can be simulated quite closely. This effect is
most suitable for electric organ Patches.
80
Description
Sets the number of stages in the
phase shift circuit (four (4STAGE)
or eight (8STAGE)).
Setting this to eight stages
(8STAGE) increases the number of
the frequency points that sound is
canceled, giving a sharper effect.
4 stage
Freq.
8 stage
Freq.
Specifies the center frequency at
which the sound is modulated.
Specifies the frequency of modula-
tion.
Specifies the depth of modulation.
Sets the phase of both left and right
swelling.
NORM: The left and right phase
will be the same.
INV: The left and right phase will
be opposite.
Specifies the amount of feedback
for the phaser.
Higher settings will give the sound
a stronger character.
Volume of the phase-shifted sound,
relative to the direct sound
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range
Parameter
Value
Speed
SLOW, FAST
Low Slow
0.05–10.0 Hz,
Rate
note
Low Fast
0.05–10.0 Hz,
Rate
note
Low Accel-
0–15
eration
Low Level
0–127
Hi Slow
0.05–10.0 Hz,
Rate
note
Hi Fast Rate
0.05–10.0 Hz,
note
Hi Accelera-
0–15
tion
Hi Level
0–127
Separation
0–127
Ps Low Freq
50–4000 Hz
Ps Low Gain
-15– +15 dB
Ps Hi Freq
2000–20000 Hz
Ps Hi Gain
-15– +15 dB
26: Tremolo/Auto Pan
This is a stereo tremolo or auto-pan effect. Tremolo cyclically
modulates the volume to add tremolo effect to the sound. The
Auto Pan effect cyclically modulates the stereo location of the
sound.
Parameter
Value
Mode
TREMOLO,
AUTO PAN
Waveform
TRI, SAWUP,
SAWDN, SQR,
SIN
SAWUP
Rate
0.05–10.0 Hz,
note
Depth
0–127
Description
Simultaneously switch the rota-
tional speed of the low frequency
rotor and high frequency rotor
SLOW: Slows down the rotation to
the Slow Rate.
FAST: Speeds up the rotation to the
Fast Rate.
Slow speed (SLOW) of the low fre-
quency rotor
Fast speed (FAST) of the low fre-
quency rotor
Adjusts the time it takes the low
frequency rotor to reach the newly
selected speed when switching
from fast to slow (or slow to fast)
speed.
Volume of the low frequency rotor
Slow speed (SLOW) of the high fre-
quency rotor
Fast speed (FAST) of the high fre-
quency rotor
Adjusts the time it takes the high
frequency rotor to reach the newly
selected speed when switching
from fast to slow (or slow to fast)
speed.
Volume of the high frequency rotor
Spatial dispersion of the sound
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range
Description
Selects whether to use tremolo or
auto pan.
Selects the type of modulation.
TRI: Triangle wave
SAWUP/SAWDN: Sawtooth
Wave
SQR: Square wave
SIN: Sine wave
SAWDN
Frequency of modulation
Depth of modulation

Advertisement

Table of Contents
loading

Table of Contents