Table of Contents
Advertisement
Creating/Editing Patches (Patch Mode)
1. Touch <▼MENU> in the upper right of the
screen.
A pulldown menu appears.
2. In the pulldown menu, touch <PATCH List>.
The PATCH List window appears.
3. Select a patch from the list.
Either turn the VALUE dial or use [INC/+][DEC/-] to
select a patch. You can also select a patch by touching it
on the display.
The on-screen keys have the following functions.
<P001-U192>: Change the buttons at both edges of the
screen to P001-U192.
<U193-U448>: Change the buttons at both edges of the
screen to U193-U448.
<Algorithm>: Change the buttons at both edges of the
screen to Patch Algorithm.
< << >: Return to the preceding screen page.
< >> >: Advance to the next screen page.
4. Touch <OK> to select a patch.
Top Screen
You can go to the top screen by touching <Top> in the lower
part of the screen.
For details, refer to "The Top Screen of Patch Mode"
(p. 14).
SYSTEM MIC Setting Screen
You can go to the top screen by touching <Mic Setting> in the
lower part of the screen.
Patches whose patch algorithm is Keyboard~ do not
have this screen.
22
Switching the Mic Setting
The VC-2 can store eight mic settings.
In the upper right of the screen, touch <▼MENU> to access
the pulldown menu, and choose one of the eight templates.
Note that when you change the parameter values, the mic
settings will also change (and be saved automatically).
Naming a Mic Setting (Setting Name)
You can assign a new name to a mic setting.
1. Touch <▼MENU> in the upper right of the
screen.
A pulldown menu appears.
2. In the pulldown menu, touch <Setting Name>.
The MIC Setting Name screen appears.
3. Touch the on-screen alphabetic or numeric
keys to enter the new name in the text box.
The on-screen keys have the following functions.
<←><→>: Move the cursor in the text box to the desired
input location.
<SHIFT>: Turn this on when you want to input
uppercase letters or symbols.
<Insert>: Turn this on when you want to insert a
character at the cursor location.
<Clear>: Erases all characters in the text box.
<Delete>: Deletes the character at the cursor location.
<Back>: Deletes the character that precedes the cursor
location.
You can also move the input location cursor by pressing
the [
][
] cursor buttons. Pressing [
the character at the cursor location to uppercase, and
pressing [
] will change it to lowercase.
4. When you have finished inputting, touch <OK>
to finalize the mic setting name.
] will change
Advertisement
Table of Contents
