Table of Contents
Advertisement
Equal Temperament
This tuning divides the octave into 12 equal parts, and is
the most widely used method of temperament used in
Western music. The V-Synth employs equal temperament
when the Scale Tune Switch is set to "OFF."
Just Temperament (Tonic of C)
Compared with equal temperament, the principle triads
sound pure in this tuning. However, this effect is
achieved only in one key, and the triads will become
ambiguous if you transpose.
Arabian Scale
In this scale, E and B are a quarter note lower and C#, F#
and G# are a quarter-note higher compared to equal
temperament. The intervals between G and B, C and E, F
and G#, Bb and C#, and Eb and F# have a natural third-
the interval between a major third and a minor third. On
the V-Synth, you can use Arabian temperament in the
three keys of G, C and F.
<Example>
Note name
Equal tem-
perament
C
0
C#
0
D
0
Eb
0
E
0
F
0
F#
0
G
0
G#
0
A
0
Bb
0
B
0
Transmitting Data to an External
MIDI Device (Data Transfer)
Patch, setup and system settings will be transmitted to an
external MIDI device. This operation is called bulk dump. Use
this operation when you want to connect another VC-2 (V-
Synth) and play it using the same settings, or to save your data
on an external MIDI device as a precaution against possible
Just Tem-
Arabian
perament
Scale
(tonic C)
0
-6
-8
+45
+4
-2
+16
-12
-14
-51
-2
-8
-10
+43
+2
-4
+14
+47
-16
0
+14
-10
-12
-49
Creating/Editing Patches (Patch Mode)
loss of sound data or system settings.
To transmit data to an external MIDI device, connect the
external MIDI device and V-Synth as shown in the diagram.
fig.08-01.e
MIDI OUT
1. Touch <▼MENU> in the upper right of the
screen.
A pulldown menu appears.
2. In the pulldown menu, touch <Data Transfer>.
The Data Transfer window appears.
3. In "Source," select the type of data that you
want to transmit.
<ALL>: Patch, setup, mic setting, system
<SETUP+MIC Sets>: Setup and mic setting
<SYSTEM>: System
<PATCH>: Patch
If you selected <PATCH>, specify the patch that is to be
sent.
<WORK>: Transmit user patches.
Use the "FROM" - "TO" fields to specify the range of
patch numbers (U001-U448) that will be transmit.
<TEMP>: Transmit patch from the temporary area.
4. Set the external MIDI device so that it will be
ready to receive data, and touch <Execute> to
execute data transmission.
While the data is being transmitted, the display will
MIDI IN
MIDI Sequencer
V-Synth
19
Advertisement
Table of Contents
