Saving Patches (Write); Deleting Patches (Del); Copying Patch Controller Settings (Ctrlcopy) - Roland VC-2 Owner's Manual

Saving Patches (Write)

Changes you make to sound settings are temporary, and will
be lost if you turn off the power or select another sound. If you
want to keep the modified sound, you must save it in the VC-2
card.
When you perform the save procedure, the data that
previously occupied the save destination will be lost.
1. Turn the VALUE knob to specify the save-
destination patch (U001~U448).
2. Press the VALUE knob.
The display will ask "Patch Write OK? Push ENTER."
3. Press the VALUE knob once again.

Deleting Patches (Del)

1. Turn the VALUE knob to specify the patch you
wish to delete (U001~U448).
2. Press the VALUE knob.
The display will ask "Patch Delete OK? Push ENTER."
3. Press the VALUE knob once again.
Creating/Editing Patches (Patch Menu)
Copying Patch Controller
Settings (CtrlCopy)
1. Turn the VALUE knob to specify the copy-
destination patch.
If you select the same user patch for both Range fields,
only that patch will be copied.
If you select different user patches for the two Range
fields, the patches within that range of patch numbers
will be copied.
The copy operation will not be carried out if the copy-
destination patch is "INIT PATCH."
2. Press the VALUE knob.
The display will ask "CtrlCopy OK? Push ENTER."
3. Press the VALUE knob once again.
57