Table of Contents
Advertisement
Basic Operations
Basic Screen
Shows the bit rate for the
video to livestream or record.
Shows the storage capacity
and free space of the SD card.
Operating the Parameter Area
Four parameters are shown in the parameter area at the bottom of the display. Use the [F1]–[F4] knobs to edit and confirm the values.
¹ Use the AUDIO IN 1–4 and HDMI IN 1–2 [SETUP] buttons, and the [AUDIO REC], [VIDEO REC], [STREAM] and [REC/ON AIR] buttons to switch
between parameters to display.
¹ You can assign the functions you want to show in the parameter area (analog gain, mute, delay, etc.) to the AUDIO FUNCTION [1]–[5] buttons.
¹ If there are more than four parameters, use the [VALUE/CURSOR] knob to switch between pages and show the additional parameters.
Select the parameters to show in
the parameter area
8
Preview video (PVW)
Shows the input video.
Shows four parameters, the values of which you can edit and confirm using the [F1]–[F4] knobs.
Final output video (PGM)
Shows the final output video.
Parameter area
Shows the elapsed time for
livestreaming or recording.
Shows the network connection
status.
Status area
Switch between pages with the
[VALUE/CURSOR] knob
Use the [F1]–[F4] knobs to
edit and confirm the values
Advertisement
Table of Contents
