T) Calling A Patch Preset; Calling A Tone Memory - Roland SUPER JUPITER MKS-80 Owner's Manual

1} Calling a Patch Preset
Any Patch Preset can be recalled in the Play mode.
® Set the Memory Area Switch @ to the desired
position.
(2) By using a Bank Button or Number Button
®) , assign the Patch Preset you wish to recall.
2) Calling a Tone Memory
You cannot change Tone Memories in the Play
mode. Turn the M KS-80 to the Edit mode.
® Set the Memory Area Switch
®
to the desired
position.
(D Press theTone Button ,
d) By using a Bank Button <E) and a Number Button
® , assign the Tone Memory you wish to recall.
* To turn the M KS-80 to the Play mode, just press
the Tone Button 0 again.
* If you try to call a Tone Memory in the Cartridge
without the Cartridge connected to the MKS-80.
the Display will respond as shown below.
Cont, to p. 13
70