Regulatory Specifications; Cmn Number; Ce Notice And Manufacturer's Declaration Of Conformity - Silicon Graphics UV 3000 User Manual

Regulatory Specifications

!

CMN Number

CE Notice and Manufacturer's Declaration of Conformity

007-6402-001
The following topics are covered in this section:
• "CMN Number" on page 93
• "CE Notice and Manufacturer's Declaration of Conformity" on page 93
• "Electromagnetic Emissions" on page 94
• "Shielded Cables" on page 96
• "Electrostatic Discharge" on page 96
• "Laser Compliance Statements" on page 97
• "Lithium Battery Statement" on page 98
This SGI system conforms to several national and international specifications and European
Directives listed on the "Manufacturer's Declaration of Conformity." The CE mark insignia
displayed on each device is an indication of conformity to the European requirements.
Caution: This product has several governmental and third-party approvals, licenses, and permits.
Do not modify this product in any way that is not expressly approved by SGI. If you do, you may
lose these approvals and your governmental agency authority to operate this device.
The model number, or CMN number, for the system is on the system label, which is mounted
inside the rear door on the base of the rack.
The "CE" symbol indicates compliance of the device to directives of the European Community.
A "Declaration of Conformity" in accordance with the standards has been made and is available
from SGI upon request.
Regulatory Specifications
93