The Settings In Detail; Time Of Day And Date; Operator Section - Siemens Albatros2 RVA78.690 User Manual

Daylight saving
time/standard time
changeover
Lighting
Programming lock
Siemens
Building Technologies
6

The settings in detail

6.1

Time of day and date

The controller has a yearly clock with time of day, weekday and date. To ensure the
controller's functionality, both the time of day and the date must be correctly set.
Line no. Operating line
1 Year
2 Date
3 Time of day
5 Start of summertime
6 End of summertime
The dates set for the changeover from wintertime to summertime, and vice versa,
ensure that on the first Sunday after the set date the time of day will change from
02:00 (wintertime) to 03:00 (summertime), and from 03:00 (summertime) to 02:00
(wintertime).
6.2

Operator section

6.2.1 Operation and display
Line no. Operating line
20 Language
24 Lighting
Off
Temporarily
Permanently
27 Programming lock
Defines mode of backlit display:
•
Off
No backlight
•
Temporarily
Backlit display automatically switches off after 8 minutes.
•
Permanently
Display backlight is permanently turned on.
Parameter values can still be displayed, but not changed if the programming lock is
enabled.
• Temporary deactivation of programming.
Within the programming level, the programming lock can temporarily be
overridden. To do this, press the OK and ESC buttons simultaneously for 3
seconds. Temporary deactivation of the programming lock is maintained until
programming is quit.
• Constant deactivation of programming.
First, make the temporary deactivation, then go to operating line "Programming
lock" (27) and deactivate the programming lock
Solar compact controller
The settings in detail
23 / 64
CE1U2396en
18.08.2010